The active ingredient in TimberSaver PT ®, Disodium Octaborate Tetrahydrate or DOT, is the most widely accepted from of borates used for treatment of forest products. DOT is manufactured from naturally occurring boron, which is widely used in a variety of applications in agriculture, cleaning products and detergents, and in wood preservation.

Product Attributes

• Offers the most effective level of borate protection

• Provides protection for dry interior applications

• Protects against Fungal decay

• Protects against Formosan termites and other wood destroying insects

• Non-corrosive to metal fasteners

• Non-toxic to humans and animals

• Does not adversely affect the strength properties of the treated lumber or plywood

• Is a colorless treatment and is also available with dye to make job site product identification easier.

• Is applied through pressure-treatment process to optimize penetration of borate preservative

• Penetrates difficult-to-treat refractory species such as Spruce-Pine-Fir and Douglas Fir

Incising is required for Coastal Douglas-Fir and Western Spruce-Pine-Fir as per AWPA Standard C31.

Applications for TimberSaver PT ® treated products include:

Framing lumber Studs Sill Plate Floor Joist Roof Rafters Trusses Plywood

Interior Sheathing Furring Strips Furring Strips Flooring Moldings Interior wood Interior wood trim

TimberSaver Pt ® Protects Against These Wood Destroying Insects and Decay Causing Fungi.
 

Formosan Termites* Subterranean Termites (Coptotermes, Reticulitermes, Heterotermes) Damp wood Termites (Zootermopsis) Drywall Termites (Kalotermes, Incisitermes) Carpenter ants (Componotus) Powder post Beetles (Lyctidae) Furniture Beetles (Anobiidae) Longhorn Beetles Brown Rot Fungi White Rot Fungi Wet Rot Fungi

 

*Borate preservatives have been and continue to be a key weapon used in controlling Formosan Termites in Hawaii and other high hazard areas throughout the world. TimberSaver PT ® borate-treated lumber and plywood is protected against this aggressive termite species when the higher 0.42 pcf (DOT) retention is specified.

Handling and Use

TimberSaver PT ® borate treated wood can be sawn, nailed, drilled, stained and assembled using standard fastener systems typically used in general wood construction practices.

Lumber and plywood treated with TimberSaver PT ® must be protected from exposure to the weather while in transit and while being stored at retail yards and job sites. Timbersaver PT products should be stored out of ground contact, either indoors or wrapped in plastic to protect against exposure to liquid water.

With the exception of Southern Pine all end cut surfaces and field cuts of any type must receive an application of a approved wood preservative solution by brushing, spraying, dipping, or flooding.

The TimberSaver PT ® wood preservative and treated wood products meet the P-5 and C-31 standards set forth by the American Wood-Preservers’ Association (AWPA) and the standards set by the State of Hawaii. The AWPA is recognized as setting the standards for the wood preserving industry and is referenced in the major model-building codes throughout the United Sates. The State of Hawaii has recognized the benefits of borate treated wood since the early 1990’s.

To receive a copy of borate treated wood click here you will need adobe acrobat to view it is in pdf format.